Induro Gear Guide Part 3 - Induro BHD3 Ballhead

Welcome to part 3 of my Induro Gear Guide. In this part we'll take a look at the Induro BHD3 ballhead. I don't know what BHD really stands for but to me it means Big Heavy Duty and that's a good thing! This ballhead is a beast and I couldn't be happier with it. According to the Induro web site it weighs 2.2 pounds and is rated for a maximum load of 55 pounds. While I doubt I'll never have any camera gear that is that heavy it's nice to know I'll not outgrow this ballhead anytime soon.

Induro BHD3 Ballhead

Mounting the ballhead to the tripod is as simple as screwing it on. One feature that I probably should have covered when writing about the tripod and is absolute genius, in my opinion, is the inclusion of set screws in the base of the tripod head. After screwing the ballhead onto the base you can tighten the set screws to securely lock the ballhead onto the tripod center column. I can't tell you how many times with my previous setup that I'd pan to the left only to have the ballhead start to come loose from the tripod center column. I probably could have fixed it with a little locktite but I didn't have any at the house and never remembered to buy any when I was shopping at the local Lowes.

Canon 7D mounted on BHD3 Ballhead

Once mounted on the tripod you can mount your camera or lens using any Arca-Swiss compatible quick release plate. I have several universal ones that I bought off of eBay that I use with various cameras and lens tripod collars. Kirk Enterprises sells universal plates for $17.00 each and I bought enough for each camera body and tripod collar that I own. This allows me to attach the plate to each camera/lens and leave it there instead of having to swap it out when I want to use a different camera/lens.

Canon EF 400 f/5.6L Lens

To facilitate with balancing your camera/lens the quick release mount on the tripod and some quick release plates come marked with a center line. By aligning these two marks the camera/lens is centered properly on the ballhead as shown below. Also notice that the plate installed is longer than the tripod mount. This allows you to either slide the plate forwards or backwards as needed to customize the balance. For example I may mount the lens centered as shown when shooting with the Rebel T2i because it's lighter than my 7D. When I shoot with the 7D I may adjust the position slightly forward or backwards to adjust for the heavier camera body.

Ballhead and Mounting Plate Alignment Marks

The beauty of using a ballhead is that you have a virtually infinite amount of positions you can use to position the camera. This takes a bit of getting used to at first but once you use one for any length of time you'll never want to go back to using a regular tilt/pan head. By adjusting the various knobs on it you can control just how much tension is required to move the camera/lens. If I'm shooting a static subject I'll often lock the ballhead in place to make sure I have the most stable platform possible. Also, notice the notch cut into the side of the ballhead. This allows you to rotate the camera/lens combination to the side. This makes it possible to shoot in either a horizontal or portrait mode without having to remove the camera. If you're shooting with a lens that thas a tripod color like the EF 400 does then you can loosen its tension knob and rotate the camera which is very handy.

Cutout on Side of Ballhead

With the ballhead adjusted over to the side as shown below you can actually use it like a Gimbal Head in a pinch but as you'll see in part 4 using a Gimbal Head is SO much nicer than trying to use this setup. Something else I would do is instead of positioning the knob down as shown below I would position it towars the top so that it doesn't hit against the ballhead body.

Lens Mounted Sideways

I have no doubt that this ballhead will exceed my needs regardless of which camera/lens I mount on it. Is there anything I don't like about it? Glad you asked I have one minor nit and I honestly shouldn't mention it because it's so trivial. The knob on the bottom left in the picture above is the knob that controls how much tension is applied when you rotate the ballhead. Despite loosening it as far as it will loosen the ballhead still requires more resistance than I would expect to rotate the camera. See, I told you I shouldn't have mentioned it. As I think about it more I really can't fault the ballhead for this. It's designed to deal with loads up to 55 pounds and I may be putting what 5 or 6 pounds of weight on it at this point in time. It's no wonder it's stiff I'm only using about 1/10th of the ballheads capacity. Something else to keep in mind is I've only had this ballhead a few weeks so it hasn't been used enough to get broken in. Check back with me in 6 months time and we'll see if this continues to be an issue for me or not. I seriously doubt that it will.


One final thought - I'll be honest and say that I was seriously considering the Really Right Stuff (RRS) BH55 Ballhead. Several big name photographers use it and rave about how great it is and I have no doubt that it's a very fine Ballhead; however when you consider the BHD3 is less than half the cost of the RRS Ballhead the decision became a non brainer for me. I went with the Induro BHD3 and I had enough $$$ left over to buy the GHBA Gimbal Head that I'll be writeing about next. Cost for the Induro BHD3 Ballhead - $228.00. The link below is for the Ballhead on Amazon. If you use it to purchase one I'll receive a little commission and you'll buy an absolutely fantastic Ballhead.

Fish -- It's What's for Dinner Featuring John the Heron

John the Heron* fishing for his dinner. This was taken Saturday afternoon while Donna and I were headed out to take some pictures at one of the parks on the Navy base where I work. As we were driving into the park we spotted John and I pulled over and managed to get this shot before he gobbled it down. This is why it's important to have your camera turned on and ready to go when you leave home. If I had to take the time to get the camera out of the bag, turn it on, remove the lens cap, extend the lens hood, etc I would have missed the shot. This was taken with my 7D and EF 400 lens. Exposure was 1/2000th at f/5.6 ISO 400.


Something else I learned is to NOT leave your GPS logger sitting on the hood of the vehicle you're driving. I had set it on the hood so that it would get satellite lock before we left the house and I forgot to put it in the truck when we left. When I remembered it we drove home and looked for it. Sadly it's gone so I'll have to order another one. If you're curious the GPS data logger I use is this one: AGL3080: Amod AGL3080 GPS Data Logger.


*I picked up calling Heron's John after reading Weekend Birds II Blog Post by Brent Pennington. Be sure to check out Brent's other work. He's one hell of a photographer and always has something interesting to say in his posts.

The Wink

One of the few times I've seen a Mourning Dove sitting on something other than the ground. This one seemed to be quite curious and spent several minutes moving along the fence checking things out. I shot this with my Canon 7D and EF 400 lens. Exposure was 1/80th at 5.6, ISO 400. Camera/lens where mounted on Induro CT314 tripod and GHBA Head.

Juvenile Eastern Bluebird

This juvenile Eastern Bluebird is part of the family that is using the birdhouse in our backyard. There's a 4th member of the family but it's pretty rare that you see all 4 of them together. This shot was taken with Donna's Rebel T2i and my Canon EF 400 lens. Exposure was 1/1000th at f/5.6, ISO 1600. I'm not sure why the ISO was cranked up so high unless I had the camera set for auto ISO which is most likely the case. I have been experimenting with different ISO settings and metering modes to see what produces the best results for me.

A Pair of House Finches

In addition to the Eastern Bluebirds that are nesting in our backyard this pair of House Finches (Carpodacus mexicanus) are regular visitors to our backyard as well. The female, shown below, was shot using Donna's Rebel T2i (I've been shooting it a lot lately) and my EF 400 f/5.6L lens. Exposure was 1/180th at f/5.6, ISO 400. She really enjoys splashing around in the bird bath and feeding on sunflower seeds.

Below is the male House Finch. I really like his red coloring. This guy can eat sunflower seeds faster than anything I've ever seen. He's also very vocal so I always know when he's around. For some reason though he likes to try and drink out of the hummingbird feeder. He'll fly over to it and try to stick his beak into one of the tubes but he can't get anything out. This picture taken with my 7D and EF 400 lens. Exposure was 1/250th @ f/5.6, ISO 400.

Mr and Mrs Eastern Bluebird

Meet Mr and Mrs Eastern Bluebird. Mr is on the right and Mrs is on the left. These are the birds that are using the birdhouse in our backyard. This is one of the few times I've managed to get a shot of both of them together. He had just given her a small bug or something so she could feed one of their young that has hatched already.  What's interesting, to me anyway, is this shot was taken at 8:30 PM and I had the ISO cranked up to 3200 on the 7D. Sure there's some noise in it but Adobe LightRoom did a great job of cleaning the image up. This was taken with my Canon 7D and EF 400 f/5.6L lens 1/90th of a second. Camera and lens were mounted on a tripod -- no way could I shoot this handheld.

Picture of the Week (POTW) #3

Picture of the week for the period 27 Jun - 3 Jul 2010. I shot this Ruby-throated Hummingbird (Archilochus colubris) using Donna's Rebel T2i and Canon EF 400 f/5.6L lens. I'm not sure why it using the wires for our satellite dish as a perch but it landed on it numerous times that afternoon.

Ruby-throated Hummingbird.

Exposure was at f/5.6 for 1/500th second, ISO 1250.

Picking an image this week was once again a hard task. I deliberately excluded several shots of the nesting Eastern Bluebirds in a attempt to post something other than a bird but as you can see we failed at that task. After narrowing it down to two photos we started looking at them at 100% magnification and this one ended up being selected because it was much sharper than the other photo. Since we're going to put these into a book at the end of the first year we figured we'd better go with the sharper of the two pictures.

Picture of the Week (POTW) #2

Picture of the week for the period 20 - 26 June 2010. I took this one of a Male Eastern Bluebird that has taken up residence in our birdhouse. He was bringing some dinner to Mrs. Bluebird but she wasn't in the birdhouse at the time. We are really enjoying watching the birds and how the interact with each other. They seem to be a bit less weary of our presence in the backyard as well. We don't know how long they've been occupying the birdhouse but we know there are 4 eggs in the nest. According to Birds of the Carolinas Field Guide, Second Edition: Companion to Birds of the Carolinas Audio CDs it takes 12 to 14 days for the eggs to incubate and then 15-18 days of fledging before the young birds will be ready to fly. This shot was taken handheld with my Canon 7D with the EF-400 f/5.6L lens. Exposure was 1/500 second @ f/5.6, ISO 400.

Honey, I'm Home!

A male Eastern Bluebird (Sialia sialis) brings some dinner home to Mrs. Bluebird. Only problem was Mrs wasn't in the bird house :). I took this handheld with my 7D and EF 400 f/5.6L lens, 1/1000th at f/5.6, ISO 400.

Learn From My Mistake

Learn From My Mistake
Originally uploaded by zackojones

This is what happens when you fail to check your equipment settings before going out to shoot birds in flight. Previously I had been using my camera in Single-Shot mode and you guessed it. I forgot to switch it back to AI Servo when we got out of the car. This would have been a killer shot IF I weren't an idiot :).

Red-headed Woodpecker

Red-headed Woodpecker
Originally uploaded by zackojones

Red-headed Woodpecker (Melanerpes erythrocephalus)
Taken with my Canon 7D and EF-400 f/5.6L Lens.
Another bird shot from this past weekend while Donna and I were out Geocaching. It's pretty amazing now that we're into birding we are constantly trying to spot and identify each bird call we here or bird that we see. We are planning on heading back to this state park again in the future as they have all kinds of birds there and we only saw a handful of different ones. Too bad it's a 2+ hour drive to get there though :(

Turkey Vulture

(Click image to see a larger version)
Taken in Red Bank Landing, South Carolina (Goose Creek), Canon EOS 7D and EF 400mm f/5.6L lens. Exposure was 1/500 @ f/8 ISO 100

Turkey Vulture (Catharties aura)

Yes they are terribly ugly birds when you see one up close but they are so awesome to watch when they soar overhead. I shot this particular Turkey Vulture on the base where I work. There's a park that has several ponds and nature trails for you to explore and I saw this guy circling overhead. When I saw him get a little closer I was able to get this shot.